How To Format Hard Disk

If you feel something is wrong with your hard drive, or would like hard drives like new, one way you can do is reformat it repeated.

Following Repeat Steps Format Hard Disk:
1. Back up your important files that exist on the hard drive because the format command will erase all existing files on your hard disk. If you have a cd-rw drive or dvd-rw drive can back up with a way to burn your files into cd or dvd, or if you do not have a CD burner, just use a flash disk, no matter if it's enough to hold your data.

2. Then the next step is to create a Windows boot disk / rescue disk on a floppy diskette 1.4 MB. It aims to boot diskette into the floppy not directly through your hard drive. The term you would use microsoft os dos existing on the diskette that you created.

3. If you do not have DOS, try to borrow or buy a CD that contains DOS, I used to get on the course, so no need to create a system on diskette. Just stay put, use for bootable.

4. Change Bios settings when the computer is turned on you must go directly to the display for setting the bios boot sequence options. When a new computer is turned on, press the delete key until the bios screen appears on your computer monitor. Change the boot sequence with the sequence of the first floppy disk.

5. Format Hard Disk. After the boot order in bios to be replaced, you insert a floppy disk and then restart your computer. Later you will be automatically booting the computer from the floppy and select the boot without cd-rom to get faster boot process. After entering the command prompt a:, type format c: and press enter. The same can be applied to another partition harddik adjusted by the number of your existing partitions. If you have a partition of 3 pieces then add the command format d: and e format:.

6.Kalau you use a bootable CD, just insert it, it will automatically appear in the DOS boot.

Now your hard drive to be like new again.


source: pcplus